In a PCB, if I try to set the snap size to 0.254 mm, it first appears to be set to 0.254 mm. But when I select and deselect a component, the snap size changes to 0.25 mm. I have checked that it does actually round to 0.25 mm because the components placed on a 10 mil snap grid are not aligned with the rounded 0.25 mm grid spacing when I try setting it to 0.254 mm in metric units. This problem has existed for at least a year. Can the number of decimal places be increased for snap size etc. please? The 2-decimal-places limitation remains the same on all 3 Units settings (inches, mil and mm). My workaround is to keep the Units setting to 'mil', which annoyingly means entering track widths and hole sizes in mil, converting them from mm. Browsers: Chrome and Edge. Thanks.