Hi there,
New to PCB designs, new to EasyEDA. I'd like to know if it's possible and how to design a ground plane on a PCB using EasyEDA.
I don't know if it's the correct term, but here is an example image. I'm trying to adapt a drill on my 3D printer, and instead of "scratching" 70% of the board to remove the copper, I prefer to only outline the traces, it will save me time.
Thanks.
@andyfierman Indeed, ordering through EasyEDA is a great option. Currently, it's the first time I'm designing PCBs and I'm trying to make the prototypes myself.
Ordering through EasyEDA would make me order 5 pieces minimum, right? Even if 10$ isn't too much for a start, 5 pieces of something I only need one. But when the prototypes are done, I could make use of multiple PCBs, well printed and good quality.
Thanks for the reply !
You might like to read:
https://easyeda.com/andyfierman/Welcome_to_EasyEDA-31e1288f882e49e582699b8eb7fe9b1f
and then if you decide that you really do want to produce a PCB directly, without first creating a schematic then:
https://easyeda.com/forum/topic/How_does_the_Connect_Pad_to_Pad_tool_work_-JgQO0Ay7H
:)
Brand new interactions and interfaces. 
Easy to use and quick to get started. 
https://docs.easyeda.com/en/PCB/Copper-Pour/index.html
Why not just design the board in EasyEDA and then order low cost, professional quality PCBs with proper through-plated holes, solder mask and silkscreen directly through EasyEDA?
https://docs.easyeda.com/en/PCB/Gerber-Generate/index.html