Hi there,
I have a sort of (dumb) question. But I did a copper pour for two ground planes. My board has all headers, with no components, and one XHC connector.
Do I have to connect the GND pins of my headers? Or if they are through holes is that enough (sort of like a via)?
here is a picture example of my board:
It's kind of a should no question, I just notice that even when I auto-routed it would not connect these pins with any tracks.
Project URL: [https://easyeda.com/jcfor3ver/Zone-Stand](https://easyeda.com/jcfor3ver/Zone-Stand)
It is the ZoneStand PCB
Thank you!
