You need to use EasyEDA editor to create some projects before publishing
Having confusion with this connector
429 5
Pablo Carrero Garcia 2 years ago
Good evening mates!. I am in doubt about one connect i need to use in my project. The connector is "Amphenol FCI Clincher 2 Position Male". I didnt find anything on the library, so that i have created one. The problem is that i dont know if the dimmensions are properly, due to the fact that i can not find the dimmensions of the connector. I only know that both holes are separated 2.54mm. Another question is that i dont know if the pad must be circular or rectangle. I did circular because i have thought it was better, but dont know if the dimension is correct or not. I show you what i did. Could someone help me please!. Thank you very much! ![doubt.png](//image.easyeda.com/pullimage/MzNoVo3o28Ct8LwECF1YO40O8NFDcEo4QXLmSl3i.png)
Comments
andyfierman 2 years ago
Need at least some images of the connector. Links to suppliers etc? Google is your new best friend. Go here: [https://www.amphenol-icc.com/product-series/clincher-flex-connectors.html](https://www.amphenol-icc.com/product-series/clincher-flex-connectors.html)<br> <br> Read these: [https://www.amphenol-icc.com/clincher-65801002lf.html](https://www.amphenol-icc.com/clincher-65801002lf.html)<br> <br> [https://cdn.amphenol-icc.com/media/wysiwyg/files/documentation/bus-12-022.pdf](https://cdn.amphenol-icc.com/media/wysiwyg/files/documentation/bus-12-022.pdf)<br> <br> [https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/65801.pdf](https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/65801.pdf)<br> <br> Create you footprint to match the datasheet. <br> Looks like these connectors just push on to a 2.54mm (0.1") pitch make header strip:. You could use a square pad to help identify pin 1 and a round pad for pin 2. Add a dot in the top layer silkscreen (and on bottom layer will help debugging) to identify pin 1 once the header has been fitted because it covers the pads. :)
Reply
Pablo Carrero Garcia 2 years ago
Thank you. I want to share the layout, its simple. Ill share the connector too. The only problem is that i dont know if the pins diameter of the connector is ok. Other question is if i can get problem with this layout, i mean, wires going above others. ![test.png](//image.easyeda.com/pullimage/q502UtiBj562M4dhfrTkYL3mvzH8ShB4wwyDqVRB.png)![41+KHPFH-gL._AC_SX425_.jpg](//image.easyeda.com/pullimage/c4Ix3ZazqCMWHL0HA710aofLIj3JX4MBi6iv07pC.jpeg)![test2.png](//image.easyeda.com/pullimage/HwvKkzt6VLPk7cDkpygtLNuhvMXb1ABx0Gzslqjj.png)
Reply
andyfierman 2 years ago
If you want to share a project,  please share the project and not just screenshots of it. To share a project please see **Sharing** in the **Tutorial** and also read: [https://easyeda.com/forum/topic/How-to-make-a-Project-public-and-share-the-links-to-it-9f006513b84b412580910905b0281d20](https://easyeda.com/forum/topic/How-to-make-a-Project-public-and-share-the-links-to-it-9f006513b84b412580910905b0281d20)<br> <br> PCBs in EasyEDA are by default 2 sided so you can route copper on top and bottom layers. To understand more about this please see: [https://easyeda\.com/andyfierman/Elements\_of\_a\_simple\_PCB\-e42c7b2a4e17449f821a97d04806aeeb](https://easyeda.com/andyfierman/Elements_of_a_simple_PCB-e42c7b2a4e17449f821a97d04806aeeb)<br> <br> and: [https://easyeda.com/forum/topic/Understanding-Ratlines-371bdbf646c54b23a57451eb05b2026d](https://easyeda.com/forum/topic/Understanding-Ratlines-371bdbf646c54b23a57451eb05b2026d#:~:text=Ratlines%20do%20not%20represent%20PCB,physical%20routing%20of%20that%20net)<br> <br>
Reply
andyfierman 2 years ago
Design your Footprint to meet the dimensions given in the 2 pin Clinch connector datasheet.
Reply
andyfierman 2 years ago
To correct a couple of typos: Create your footprint to match the datasheet: [https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/65801.pdf](https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/65801.pdf) Looks like these connectors just push on to a 2.54mm (0.1") pitch male header strip. So your footprint has to be for a 2 pin 2.54mm pitch male header strip but with enough space around it to make room for the push-on connector that will plug onto the header. See Figure 2 in: [https://cdn.amphenol-icc.com/media/wysiwyg/files/documentation/bus-12-022.pdf](https://cdn.amphenol-icc.com/media/wysiwyg/files/documentation/bus-12-022.pdf)
Reply
Login or Register to add a comment
goToTop
你现在访问的是EasyEDA海外版,使用建立访问速度更快的国内版 https://lceda.cn(需要重新注册)
如果需要转移工程请在个人中心 - 工程 - 工程高级设置 - 下载工程,下载后在https://lceda.cn/editor 打开保存即可。
有问题联系QQ 3001956291 不再提醒
svg-battery svg-battery-wifi svg-books svg-more svg-paste svg-pencil svg-plant svg-ruler svg-share svg-user svg-logo-cn svg-double-arrow -mockplus- -mockplus- -mockplus- -mockplus- -mockplus- -mockplus- -mockplus- -mockplus-@1x -mockplus-

Cookie Notice

Our website uses essential cookies to help us ensure that it is working as expected, and uses optional analytics cookies to offer you a better browsing experience. To find out more, read our Cookie Notice