Forum - EasyEDA - An Easier Electronic Circuit Design Experience

Latest Topics Latest Replies EasyEDA Std EasyEDA Pro JLCPCB LCSC OSHWLAB General Discuss

Schematic PCB Simulation Skill Extension Feature Requests Bug Reports

Help with simple circuit

1081 6

Garry48 7 years ago

Help me! I'm an noob and I can't solve this! I have a screw type terminal block, a resistor, and a led in the schematic. I have tried netlabels, netports, and +5V/GND and can not get the PCB to have the correct wiring. If I use the PCB tool and add the airwires, it will autoroute. If I make a change and update the PCB, the airwires get erased and the autorouter goes to 99% and hangs. It looks like the netlist is incomplete. What am I doing wrong? 'DRC_Errors' is my Public 'project'. TIA Garry

Comments

support 7 years ago

Hi, You don't have public projects, for 99% you maybe need to change the PCB, or set the PCB autorouter rules Please read the skills of autoroute at https://easyeda.com/Doc/Tutorial/new.htm#Auto-Router

andyfierman 7 years ago

@Garry48, Your project is still private. PLease read: https://easyeda.com/Doc/Tutorial/share.htm#Sharing and: https://easyeda.com/forum/topic/Project_management_in_EasyEDA_V3_10_x_onwards-ciuQpnJVv

Garry48 7 years ago

Andy, Apologies, I was sure I checked the Public checkbox. Now it shows as Public. When I had the terminal block in the circuit, I added netports and tried to see if airwires were added when I 'updated' the PCB--No. Then I changed them to netlabels--No. I disconnected the terminal block and tried adding +5 and GND, still--No. There has to be some way to have a terminal block and get it to add airwires. I do not want to manually edit my PCB every time I make schematic changes.

Garry48 7 years ago

Andy, Never mind. My twin brother figured it out. The 'SparkFun' LED was 'blown'! It is NOT designed correctly. When using a different led, it works perfectly! You guys deserve a big 'THANK YOU'! EasyEDA is a wonderful program. I just wished I was 50 years younger so I could learn more and faster! Thank You to Dillon and crew! Garry

andyfierman 7 years ago

Garry, Glad you are off and running. * So that we can correct it, can you tell us which SparkFun LED you were trying to use? Thanks.

Garry48 7 years ago

Andy, It took some searching, but I found it! Package: LED3MM Contributor: 'SPARKFUN' This LED is NOT properly designed for EasyEDA circuits. I would bet there are more contributed by 'SPARKFUN'! LED5MM? Garry

你现在访问的是EasyEDA海外版，建议访问速度更快的国内版 https://lceda.cn(需要重新注册)
如果需要转移工程请在个人中心 - 工程 - 工程高级设置 - 下载工程，下载后在https://lceda.cn/editor 打开保存即可。
有问题联系QQ 3001956291 不再提醒

Cookie Notice

Our website uses essential cookies to help us ensure that it is working as expected, and uses optional analytics cookies to offer you a better browsing experience. To find out more, read our Cookie Notice

Unleash creativity, start design now.

Cookie Notice