In this simulation: [https://easyeda\.com/andyfierman/LM13700\_test\_jig\-174d056ace2f40d6b66f170483dd2425](https://easyeda.com/andyfierman/LM13700_test_jig-174d056ace2f40d6b66f170483dd2425) there are two devices from the same package used. The supply pin names (for both instances) match the supply netlabels:  If the supply pins for both devices are shown and connected then the simulation runs as expected:   If the supply pins for either of the devices are hidden then the simulation results show that the device with the hidden pins is unpowered: