[https://docs.easyeda.com/en/PCB/Copper-Pour/index.html#Copper-Area-Manager](https://docs.easyeda.com/en/PCB/Copper-Pour/index.html#Copper-Area-Manager)

Thank you.  But there is no option to select and set clearance for my 28VRTN plane: <br> 

Just edit the number in the Clearance box; 

Also, Clearance here: 

There is no option in the drop down box for inner 1 layer - which is my ground layer (24VRTN net).

@peternarbus, I don't know because your project is private so only you can see the details of your  query. Please give more information or make your project public.

Sorry - my project is now public: [https://easyeda\.com/editor\#id=7b3eddad3810443581c68717077985b8\|6e7cbd13c83c42ff9aedecb037ff0cd9\|242aa724a0a342d99b44b5c4f25aaad9\|\!d213952d723042b8a6394a46169e6610\|\!3d6ade8f346c48f8b0b7be6ddb33ca51](https://easyeda.com/editor#id=7b3eddad3810443581c68717077985b8|6e7cbd13c83c42ff9aedecb037ff0cd9|242aa724a0a342d99b44b5c4f25aaad9|!d213952d723042b8a6394a46169e6610|!3d6ade8f346c48f8b0b7be6ddb33ca51)

Also, inner 1 layer does not plot in gerber ...

"There is no option in the drop down box for inner 1 layer - which is my ground layer (24VRTN net)." I assume you are referring to: 28VRTN net. If you set inner 1 layer to PLANE and assign it to 28VRTN then you will get a plane on that layer but I cannot see a way to set a different clearance for the 28VRTN net on inner 1 layer that is different from that set in the Design Rules for the rest of the 28VRTN net on other layers. If however, you set inner 1 layer to SIGNAL and assign it to 28VRTN then you will get a plane on that layer for which you can set a different clearance for the 28VRTN net on inner 1 layer from the rest of the 28VRTN net on other layers. To change the clearance of the 28VRTN copper area you have placed on your inner 1 layer defined as a SIGNAL layer, select the copper area and edit the Clearance attribute:  You can also edit the clearance in the Copper Area Manager. * I'm not sure: does that answer your question? <br> <br>

Yes, that answers my question very well.  Thank you! But, I do not understand why EasyEDA does not print plane layer Gerber.