Forum - EasyEDA - An Easier Electronic Circuit Design Experience

Latest Topics Latest Replies EasyEDA Std EasyEDA Pro JLCPCB LCSC OSHWLAB General Discuss

Schematic PCB Simulation Skill Extension Feature Requests Bug Reports

How do I array a small PCB into a larger board for ease of manufacture.

844 5

MidnightVisions 5 years ago

Hello, I have a small PCB 24mm x 27mm that I want to array into a larger board to make a roughly a 100mm x100mm board, and be able to snap the boards apart but don't see the tools I need to do that. I want to be able to snap the boards apart so I can get individual boards out of the arrayed PCB. I just need to make the boards 100mm x100mm to meet the requirements of manufacture, no other reason. Since I don't see this option how do I specify this to JLCPCB to manufacture it? Thanks

Firefox 56.0 Windows 7

Comments

dillon 5 years ago

![image.png](//image.easyeda.com/pullimage/pU3REJihgHUDzQhdbEm8jvKHhW9JzD2Gn545j7sU.png) ![image.png](//image.easyeda.com/pullimage/OEDfmJUHBRoGGq9rJ174DvsYQMf7TkJShJxVLZKG.png) Keep the space to 0 if you don't know how

Chrome 68.0.3440.106 Windows 10

MidnightVisions 5 years ago

That copied the board outline, but not the contents of the original board. I did 3 Column x 2 Row. Only the top left PCB has the contents, and the other five are blank outlines of the PCB. Just to confirm, when these boards are delivered to me, will I see separate boards, or will I see 6 to a PCB and have to cut them apart myself? My intentions are I want individual finished boards delivered to me.

Firefox 56.0 Windows 7

UserSupport 5 years ago

dont worry about the content for the copy outline, the pcb factory will copy the content for you, they know how to do that.

UCBrowser 11.6.4.950 AndroidOS 7.0 EasyEDA 5.7.22

MidnightVisions 5 years ago

thank you!

Firefox 56.0 Windows 7

SERVICIO TECNICO FINANSERSA 5 years ago

The same happened to me. I want to copy both outline AND copper traces, to output a file to print in a single sheet and then thermally transfer to the PCb copper. After etching and drilling, I would be able to V-cut each board.

Chrome 68.0.3440.106 Windows 10 EasyEDA 5.7.26

你现在访问的是EasyEDA海外版，使用建立访问速度更快的国内版 https://lceda.cn(需要重新注册)
如果需要转移工程请在个人中心 - 工程 - 工程高级设置 - 下载工程，下载后在https://lceda.cn/editor 打开保存即可。
有问题联系QQ 3001956291 不再提醒

Cookie Notice

Our website uses essential cookies to help us ensure that it is working as expected, and uses optional analytics cookies to offer you a better browsing experience. To find out more, read our Cookie Notice

Unleash creativity, start design now.

Cookie Notice