I found a custom part for the STM32F103F Generic Board and I am trying to make a PCB, but I get the following error in the Package Verification.
And this
How can I fix this problem?
Thanks,
Tony
I found a custom part for the STM32F103F Generic Board and I am trying to make a PCB, but I get the following error in the Package Verification.
And this
How can I fix this problem?
Thanks,
Tony
@andyfierman Well, I tried to fix the issue, but had a difficult time. I still do not have it working.
I can create the schematic layout for the part, but can't seem to get the PCB footprint to work.
I looked online for a video, but really could not find anything that could solve my issue.
I guess a step-by-step for a totally custom part, in this case a 40 pin module would help.
Thanks,
Tony
Brand new interactions and interfaces. 
Easy to use and quick to get started. 
Check the schematic symbol and the PCB footprint against the original manufacturer's datasheet.
The two objects must have the same number and names of pins (ignore the spice pin numbering since this device has no spice model).
Clone whichever part needs correcting, correct it then save it with a unique name.
Then update the pcb package assigned to the schematic symbol to make sure that the symbol pulls the right package into the PCB.