If you need to make a 4 wire or Kelvin Sensing connection to something like a current sensing resistor then this Project should help: [https://easyeda.com/andyfierman/4-wire-sensing-using-the-kelvin-connection](https://easyeda.com/andyfierman/4-wire-sensing-using-the-kelvin-connection) Note that the same technique described in the above project can also be used to create specialised routing for high speed decoupling capacitors such as discussed in this post: [https://easyeda.com/forum/topic/How-to-insert-correct-decoupling-capacities-8462e38c7dec4e73859a599a8f62245c](https://easyeda.com/forum/topic/How-to-insert-correct-decoupling-capacities-8462e38c7dec4e73859a599a8f62245c)