Hi, as far as I've tested, there is no way to have the tracks increase in size gradually, but you can use the "solid region" tool to imitate that! Here I have a Micro USB connector and some pads: **The net "H2_1" is actually VCC. I'd want some thicker copper for it instead of that thin trace.**  **Create a solid region where you need it with the same net as the connection you need:**  **Here you can see the end result:**  **Hope that helps!**

Hi! Here is also an example project how I use copper area to increase track width: [https://easyeda\.com/markus\_jidoka/400v\_geiger\_tube\_psu\_v1\-0\_copy](https://easyeda.com/markus_jidoka/400v_geiger_tube_psu_v1-0_copy) Regards, Markus Virtanen HW / Electronics Designer