Hi! Write "pad" to library search field and you can choose these pads from few categories, such as LCSC, System and User Contributed. However, you need to be carefull with user contributed parts because there might be design errors left by the users that has designed them.  Regards, Markus Virtanen HW / Electronics Designer

"Please note I dont put a PAD on my schematic (I do not know how to do that)." It looks like you want to put some pads on the PCB to solder wires into. Please read: [https://easyeda.com/forum/topic/How-to-wire-directly-to-the-PCB-a0c29f318aff4c59a45cda060d3ca3b7](https://easyeda.com/forum/topic/How-to-wire-directly-to-the-PCB-a0c29f318aff4c59a45cda060d3ca3b7)<br> <br> * There is all the information you need about how to create, edit and use symbols and footprints in the [EasyEDA Tutorial](https://docs.easyeda.com/en/Introduction/Introduction-to-EasyEDA/index.html) (1) and in "[How to create findable footprints and searchable symbols](https://docs.google.com/document/d/1ZRkPPMID68mBz9j9RMIJARNSXK12PDULZXP7kiThvDg/edit?usp=sharing)" (2.3) in (2) in: [https://easyeda.com/forum/topic/How-to-ask-for-help-and-get-an-answer-71b17a40d15442349eaecbfae083e46a](https://easyeda.com/forum/topic/How-to-ask-for-help-and-get-an-answer-71b17a40d15442349eaecbfae083e46a)<br> <br> * There is also useful information to help you understand how to get the best experience when designing PCBs using EasyEDA in "[How to design PCBs](https://docs.google.com/document/d/1CU7RuPyFlSZPzWBN-YZ0x87xeAB4xpLdLaIsUwhLj_M/edit?usp=sharing)" (2.2) in the same link, paying particular attention to Appendix A.