In the moder EDA softwares, there are no symbol for this function. you can draw your schematics like bellow image  If you just need to create a diagram, you can use an Arc to do this.

You do not need a jumper. If the wires are drawn so that one wire is drawn across another without stopping at the crossover point then there will be no junction dot created. Please also see: <https://easyeda.com/file_view_All-simulation-schematics-MUST-have-a-ground-01_y20YWvRPp.htm> :)

how do I make the auto join feature go away?  in other words  when I cross wires at a 90 degree angle... it places a red dot and joins them.  I do not want this,

Please see: [https://easyeda.com/forum/topic/How-do-I-cross-wires-so-they-don-t-connect-on-a-schematic-ee4a17bee86a44b18238d663a0d988a9](https://easyeda.com/forum/topic/How-do-I-cross-wires-so-they-don-t-connect-on-a-schematic-ee4a17bee86a44b18238d663a0d988a9)