How to Create a Schematic Library:
1、Go to the Toolbar of of “Document”, New——> Schematic Lib, and then Create a Schematic Lib File.
![enter image description here][1]
2、Draw a Schematic Lib:You could firstly put a rectangle on the center of the Schematic Lib.
![enter image description here][2]
3、Press ‘P’ to put the pin on the side of the rectangle .Or go to the super menu to place a pin
![enter image description here][3]
4、Click “space” keyboard button to rotate the pin ,and put the light pin side which is the wire connection side externally.
![enter image description here][4]
5、Click each pin to change its number and its name . You could either change it by double click the pin or change it in the righthand pin attributes.
6、After changing the name of the pins . Click”CTRL+S” to save the Schematic Lib.And change its name .
![enter image description here][5]
7、And so a new schematic Lib will be added to your Part .
[1]: /editor/20151102/563717a02ce26.png
[2]: /editor/20151102/563717a66f1ba.png
[3]: /editor/20151102/563717ae85fe0.png
[4]: /editor/20151102/563717734dc4a.png
[5]: /editor/20151102/5637178b229b9.png