Hi,
Hierarchical schematic, 2 instances of the same reuse block. The 2 blocks are powered with different powers.
![image.png](//image.easyeda.com/pullimage/DHJpmXeGAFzDOf7CwbtIToOyeoY3lC4pLSsmWOYw.png)
The below solution will connect both instances power to VCC_NW, so it is not correct.
![image.png](//image.easyeda.com/pullimage/fRscifJ3jMMADXlmtfdOWbUc0mUOcMBHe7UPgNdE.png)
It is working with the below solution but it is not nice how the VCC_NW power port is made. Any suggestions on how it is possible to use a VCC Net flag like above?
![image.png](//image.easyeda.com/pullimage/cFbllWGPLmPJm6KlVxts0DnuBpt8D7B0v3JqyQnq.png)
BR
Peter