As the title says, I need to export an Altium file to EasyEDA. Now I know that EasyEDA can import Altium files that are in ASCII format, but I can't find how to save the files as ASCII in Altium (I downloaded the trial). I tried to export as .dxf in Altium but the polylines came as seperate. I then joined the lines in the dxf file in AutoCAD, but when I tried to import it again, the lines were still seperate. Any ideas on how I could import my files so that they would come out as they should (lines connected, and if possible, with pads that are already filled). Or can I connect the lines in EasyEDA? I'll add some explanatory photos. This is how it looks in Altium: [https://imgur.com/R60KXzT](https://imgur.com/R60KXzT) In AutoCAD the lines were joined manually: [https://imgur.com/Fp2305f](https://imgur.com/Fp2305f) In EasyEDA the lines are still seperate (I held the cursor on the arc): [https://imgur.com/r7XQwgx](https://imgur.com/r7XQwgx) Long story short, I want to import my file to EasyEDA such that it would come out just like it is in Altium.