Your PCB is right.
at photo viewer, we have a way to make it better.
But gerber viewer just show it as board outline.

So, your design is OK.

Thanks Dillon!

Hi,

Are you sure the outline edge layer proper defines inner cut outs?
PCB Editor:

PhotoView:

Oshpark Gerber view:

@MMorena27,
To make a cutout inside a Board Outline, please search for:
NPTH
in:
https://docs.easyeda.com/en/PCB/PCB-Tools/index.html

https://docs.easyeda.com/en/PCB/PCB-Tools/index.html#Solid-Region

For a cutout on a PCB, we can use "Solid Region", but there is one problem. How can we accurately define the cutout position?
With most of the other tools, we can define exact coordinates, but solid region doesn't seem to support this.
This makes setting up precise cutout difficult.

Any ideas?

@digitalradiohacker

I noticed that the Solid Region tool has an 'Edit Points' button which allows you to define the position. Not sure if this is new or not.

@james_9588
Yep, things are changing fast here.
It looks like that was added after I asked about it.
One thing proving useful is to use something like Sketchup to create an outline for something, export as DXF and then import into EasyEDA. From there, you can choose to have it as board outline / silkscreen etc etc. I do it that way because Sketchup makes drawing even complex shapes pretty easy.

this is the cutout i need to make :

But such a complex shape is impossible to do with "solid region". I did it by importing a DXF, but then i cannot choose the NPTH layer... Any help?

I found the answer here : https://easyeda.com/forum/topic/Solid-region-as-NPTH-slot-in-wrong-layer-e54ed837d8ef49159cb6134740233070

Basically one can import a dxf and do right click > convert to NPTH... this is hidden and not in the documentation! I am very happy i found it but i suggest you guys include it in the documentation as custom slots are very important...

@siri87  Yes, you can use Solid Region to do this. Use hotkey L to change the draw angle when drawing.
https://docs.easyeda.com/en/PCB/Solid-Region/index.html

How to make cutout in to the board ?
Use Solid Region features to draw what do you want and then click on it and change the attribute (right top corner) Type-> Board Cutout

Hi, just to clarify, if I set the type to 'Board Cutout', and 'One-click Order PCB/SMT' on JLCPCB, will JLCPCB help me to the internal board cutout as shown in the 3D View?

@ljyhere2019,

You have posted no supporting information to illustrate the context of your question so it is not clear what you are asking and how best to answer you.

Please read:

https://easyeda.com/forum/topic/How-to-ask-for-help-and-get-an-answer-71b17a40d15442349eaecbfae083e46a



and post back with enough information including images or a link to a public project so that people can understand your question.