You need to use EasyEDA editor to create some projects before publishing
Issue importing DDB symbols from Altium Designs
413 3
mixkef 2 years ago
Hi, I have a large number of projects done in Altium . These projects are using a custom database file where the logic is similar to EASYEDA -PRO operation. A record describes symbol,footprint,3d model . I proceed to import but since many parts (eg. resistors ) have the same schematic symbol (i use RES) i end up with parts in EASYEDA schematic that have different name but same device  type. After import in EASYEEDA devices are associated to schematic symbol .So this means that all different resistors in my database are all RES devices having different name .Footprints are not imported  and also 3d models also .These are shown as extra fields but i can't use them My first thought was to change devices  in group change mode .Eg.All existing 1K 0603 resistors changed with one action from RES to 1K_0603. Doing that in edit device changed all resistors no matter value in my schematic to1K_0603 device . So working with DDB parts is not possible. At least can i select common devices and group change ? Is there easy way to do that ?
Comments
UserSupport 2 years ago
When you import to EasyEDA Pro, you need to compress the schematic and PCB as a ZIP file, otherwise the device will not be binding, the device = symbol + footprint + 3D model + properties, you can change or edit the device information at Library - Device - Project at bottom Library [https://prodocs.easyeda.com/en/schematic/side-bottom-panel-project-library/index.html](https://prodocs.easyeda.com/en/schematic/side-bottom-panel-project-library/index.html)<br> <br>
Reply
mixkef 2 years ago
@usersupport Thank you for your support . Your new program is very nice . I worry though about a couple of things that i would like further explanation My first concern is that if we install and run is there guarantee that in future EasyEDA remains a low cost or free solution .I see the free up to now and i worry ..  The big issue with program operation is that there is no mass change of devices in schematic, You have to erase one by one in case you make a change of device.Will this be fixed in the future. So far you have the best library i have seen in terms of magnitude and usability . Very good job indeed . <br> <br>
Reply
UserSupport 2 years ago
@mixkef In the future, we will provide the device replace feature
Reply
Login or Register to add a comment
goToTop
你现在访问的是EasyEDA海外版,建议访问速度更快的国内版 https://lceda.cn(需要重新注册)
如果需要转移工程请在个人中心 - 工程 - 工程高级设置 - 下载工程,下载后在https://lceda.cn/editor 打开保存即可。
有问题联系QQ 3001956291 不再提醒
svg-battery svg-battery-wifi svg-books svg-more svg-paste svg-pencil svg-plant svg-ruler svg-share svg-user svg-logo-cn svg-double-arrow -mockplus- -mockplus- -mockplus- -mockplus- -mockplus- -mockplus- -mockplus- -mockplus-@1x -mockplus-

Cookie Notice

Our website uses essential cookies to help us ensure that it is working as expected, and uses optional analytics cookies to offer you a better browsing experience. To find out more, read our Cookie Notice