You need to use EasyEDA editor to create some projects before publishing
Ledring with Touchsensor in one!
674 8
Fred 4 years ago
Hi I want to build a PCB with a 44mm led ring with 16 leds and a [TTP223 touch sensor in on one board without data leaks from de ledring to de touch sensor.](https://alltopnotch.co.uk/product/ttp223-mini-red-capacitive-touch-switch-button-self-lock-no-lock-module-arduino/) Can anyone help me to design one and make it a successful PCB. Cheers
Comments
andyfierman 4 years ago
You need to give more information about what you want it to do. Is it just hold on / release off, touch on / touch off or do you want it to have some sort of touch and hold or multi tap brightness adjustment? What power source? What dimensions? Please provide a Design Requirements Specification and a How It Works description advised in: [https://easyeda.com/forum/topic/How-to-ask-for-help-and-get-an-answer-71b17a40d15442349eaecbfae083e46a](https://easyeda.com/forum/topic/How-to-ask-for-help-and-get-an-answer-71b17a40d15442349eaecbfae083e46a)
Reply
Fred 4 years ago
Hi The PCB should be round and 44mm and the whole project is attached to a wemos micro controller. The touch sensor is just press to activate a scene on the wemos the ledring would be constant on and changes if scene is activated. The whole project is for a doorbell I have it working with lose components now but like a one in all pcb to make the project and the bell flatter than it is now. Thx
Reply
JLCPCBsupport 4 years ago
Hello ; Since you are not providing links or images of similar projects so let me make a guess, are you trying to build a NeoPixel Ring similar to the following Adafruit product : [https://www.adafruit.com/product/2862](https://www.adafruit.com/product/2862)
Reply
Fred 4 years ago
Hi Almost I want the same ledring but with a touch sensor attached to it. So I can power it with the 5 volts that come out of the wemos board use 1 dataline for the ledring and 1 data line to use the touch sensor
Reply
deskpro256 4 years ago
Hi, for anyone to help you with this, Do you have a sketch of how you would prefer it to look like? What is the working principle of the project? User approaches the doorbell, which is showing the default LED animation or idle animation. When the touch button is pressed, the device informs you/the person in the room, that there is somebody at the door and changes the LED animation or color to something else and plays a tune? I only see PCB files in the project [https://easyeda.com/berenwater/ledring-met-touch-sensor_copy](https://easyeda.com/berenwater/ledring-met-touch-sensor_copy) I suggest making a schematic too, makes the PCB component placement and routing easier. Where are you going to mount it? Mounting holes, size? Do you have an enclosure for it? If it's a doorbell, is it going to be mounted outside where you need it to be protected from elements or is it made for a room inside a building? Where is the user supposed to press the touch button? Where will the board get power? Power supply connected to terminal block or USB? Where are the connectors going to be? Back of the PCB or the front? Do you just want a PCB that connects pre-made modules together? That can also be made with perfboard and solder together with wires and put it in an enclosure. Do you expect to make 1 or 10 or 100 of these? Or do you want a custom PCB that has all the components from the modules on one board? Even an image like this would help a lot: ![TEST.png](//image.easyeda.com/pullimage/2hx1NkUkZCl86Juz3TwoZOpg5Qn1jHLXjTzO3rR8.png) I have a project that started like this: ![1.jpeg](//image.easyeda.com/pullimage/hCSY0VEsY9wBRe37VbUXKV3uHVjvzJZOEctg3iGN.jpeg) Do you want a PCB that connects modules like this: ![2.jpeg](//image.easyeda.com/pullimage/cprqWXjy2lASLUV3vs7FmqrSW4Wbfgn1pseW3BuU.jpeg) Or custom like this: ![3.png](//image.easyeda.com/pullimage/Kqi08KbE6A3vtNClOoXvGw5jTACjjq69YJUs9GYY.png)
Reply
Fred 4 years ago
I will provide some pictures later I'm at work now. Thx
Reply
Fred 4 years ago
![SAVE_20200706_124837.jpg](//image.easyeda.com/pullimage/UuU1h3EnlQjIQLviUb7yfpGlPcEblKP7YV67XWiL.jpeg)
Reply
Fred 4 years ago
Okay I tryed to make a pcb but i think it's not useable [https://easyeda.com/berenwater/ledring-met-touch-sensor](https://easyeda.com/berenwater/ledring-met-touch-sensor) I also made a picture of the bell i have now with the 2 separate components.  I don't know if the ttp223 is the best sensor but it has to fit inside the ring of course ![IMG_20200706_172709.jpg](//image.easyeda.com/pullimage/r82nvHcNzq7N8EY5hNAyf51miaGUyjmJ4Ybj6W0S.jpeg)
Reply
Login or Register to add a comment
goToTop
你现在访问的是EasyEDA海外版,建议访问速度更快的国内版 https://lceda.cn(需要重新注册)
如果需要转移工程请在个人中心 - 工程 - 工程高级设置 - 下载工程,下载后在https://lceda.cn/editor 打开保存即可。
有问题联系QQ 3001956291 不再提醒
svg-battery svg-battery-wifi svg-books svg-more svg-paste svg-pencil svg-plant svg-ruler svg-share svg-user svg-logo-cn svg-double-arrow -mockplus- -mockplus- -mockplus- -mockplus- -mockplus- -mockplus- -mockplus- -mockplus-@1x -mockplus-

Cookie Notice

Our website uses essential cookies to help us ensure that it is working as expected, and uses optional analytics cookies to offer you a better browsing experience. To find out more, read our Cookie Notice