In a project I'd like to use an LH05 AC-DC converter package (LH05-10B05). I found on LCSC, part number C91816. Added it to my schematic, connected everything, then converted it to PCB. In the [datasheet](http://www.mornsun-power.com/uploads/pdf/LH05.pdf) of the package, the pinout is 4: -VO (GND) and 8: +VO (VCC). The EasyEDA schematic is perfect, but the PCB footprint is different than the datasheet: on page 5 there is the top view, the left side is pins 1-2-3, the right should be pins 4-8. However, in the EasyEDA library, the right side pins are 8-4, so it looks like VCC and GND will be reversed if I use it. Is it a bug, or am I looking at it wrong? Thanks