Since the Autorouter is broken I'm manually routing my project. I completed about half of it the other day and since coming back to it today the Net Names aren't associating to the manual traces I'm laying on the PCB. The trace I've placed on the PCB labeled 'A12' I named, but it is in no way associated to Pad A12. EasyEDA had named it 'S$1058' for some reason. You can see how EasyEDA labeled the trace coming from A11 as an example. Also notice the Ratline does not extent from the trace (as it should) but from the pad. This all worked a few days ago...now, not so much.  Iridium