Contact Support directly before you place your order. :)

Thank you, I will try to do so. :)

You may have to change the outline from rounded corners to rectangular if you want the PCBs to be V-cut.

Why would you do that if the "Panel by EasyEDA" function will do exactly the same AND bring you a 3x3 pcbs panel already v-cut? What i want to know is how to add 2 designs in one panel..... When ordering a pcb, you get to answer how many designs will be in the pcb but then you can only upload 1 gerber file per job.... ideally, you should be able to upload gerbers 1-2-3 say you got three different versions of your pcb above, and when selecting panel by easyeda, they should be able to bring you a pcb panel consisting of 3 times each gerber design...

EasyEDA PCB provides 0.4mm, 0.6mm, 0.8mm, 1.0mm, 1.2mm, 1.6mm, 2.0mm thickness to choose from. If you need a 2.5mm or 3mm thickness board, please ask us for a quote via email. Please note that not all thicknesses [putas][1] will be available for all numbers of layers; for example no PCB house can fabricate a 32 layer PCB with a 0.4mm thickness! [1]: https://www.hescort.com/

@babontil2 How were you able to panelize them manually? I tried this but Ratlines would want me to connect components from one pcb to the next pcb. Did you had to have unique net names for each individual boards or what/how did you do it? thanks!

@kpgrafix hola pudiste panelizar las pcb? si lo has hecho podrias ayudarme?