Hi Federico, Welcome to EasyEDA. There are many ways to create probe maths expressions. The easiest is to use a `probe` statement. Advanced probing and simulation control: https://docs.google.com/document/u/1/d/1OWZVVFRAe_2NW3WratpkA_SGuHa5AcRow5ZRfvcoVTU/pub#h.4i7ojhp Note the use of the `let` command at the end of this section. Please also see the following sections of our Simulation eBook: Probing signals: https://docs.google.com/document/u/1/d/1OWZVVFRAe_2NW3WratpkA_SGuHa5AcRow5ZRfvcoVTU/pub#h.z337ya Expressions: https://docs.google.com/document/u/1/d/1OWZVVFRAe_2NW3WratpkA_SGuHa5AcRow5ZRfvcoVTU/pub#h.sqyw64 Parameters: https://docs.google.com/document/u/1/d/1OWZVVFRAe_2NW3WratpkA_SGuHa5AcRow5ZRfvcoVTU/pub#h.2r0uhxc Functions: https://docs.google.com/document/u/1/d/1OWZVVFRAe_2NW3WratpkA_SGuHa5AcRow5ZRfvcoVTU/pub#h.3q5sasy B Sources: https://docs.google.com/document/u/1/d/1OWZVVFRAe_2NW3WratpkA_SGuHa5AcRow5ZRfvcoVTU/pub#h.1jlao46 (The Google links above are to the original copy of the Simulation eBook which you can also find at: https://easyeda.com/Doc/Simulation-eBook/ but the table of contents in the EasyEDA copy is broken and misses out some sections. We are working to fix it but in the meanwhile the copy published to the web from Google Drive works just as well.)