Hi I have constructed a schematic and used the create PCB function and all is well except that one component is missing. I have other components using the same component on the schematic and they appear ok on the PCB. The nets are attached to the invisible part. I have tried erasing the component from the schematic and re installing it to no avail. I have also tried saving the project and then re running it. I have also checked that the component is visible and have turned on different layers in case the component's layer is switched off. When I reinstalled the erased component on the schematic, I did a copy and paste from one of the same components in the circuit. Does anyone have any further suggestions? Jim