My schematic appears in the small preview window, but it is not there for me to edit
300 10
Joseph Massimino 4 months ago
What is going on where my schematic is not able to be opened, but preview shows that it is there. and my PCB design is there, and able to be opened.  I need to edit one part, and can't do it if I can't open the schematic. It is the Trinity board where you see one sub folder for a copper image of the PCB. I am going to log out, and log back in and see if I can open it. This is nonsense, do they mess with the file system when we are not logged in?,
Comments
UserSupport 4 months ago
Don't understand your problem, if you can provide some images will be better.
Reply
Joseph Massimino 4 months ago
@UserSupport  Under Trinity 9v master, there is Trinity Dupe, and it is empty.  Where did it go?
Reply
Joseph Massimino 4 months ago
@joe.massimino  Also, Sheet1 is missing, I made a copy called Sheet2, but it is not the copy I need, and will take editing to fix it to be correct.
Reply
UserSupport 4 months ago
Please add UserSupport at your project member, I will help to check, that seems some specail charater causes document decompress error. ![image.png](//image.easyeda.com/pullimage/NougGuge6hOlZAa115ukb1v9B1REbWq3BdmezkF6.png)
Reply
Joseph Massimino 4 months ago
@UserSupport  I managed to recover the schematic myself, but now I need to reduce the board size, and all the ways I tried has resulted in some other problem, as in routing tells me the the parts are not on the board, but clearly they are. So i hit the back button until the auto router works, and I am back where I started, the board size needs to get smaller.  When I try to pull the top of the board down, the board loses connection, so then I try to reconnect it, and all sorts of bad things happen, so I back up and try again. I also tried deleting the board outline, and recreating it, but not of that went the way I thought it would.  Is there a tutorial on changing board dimensions?
Reply
Joseph Massimino 4 months ago
@UserSupport So i tried closing files along the top of my EasdyEda screen, and one stopped and and said I need to back it up first, but the Save button that appeared did not work, and it locked me out of everything else until I clicked something, so in order to get here, I had to click Don't save, that worked.   I took a screen shot of the button for save that did not work, but Don't save did work, so I had to use Don't save. Your software can use some major updating, just because some users have been able to work around the bugs in the software, does not make it ok.  I have a list of things that do not work, and it is not that they never work, it is that they sometimes don't work.  It all depends on some variable that I have not figured out. This is a screen shot of the Save button that did not work. I have no idea what will be missing yet, but I just want to get this board done. It is waiting on parts that are coming from China, and they take a very long time. I can't fit the part until I get it. For now, I need to change the board size, and that has not been going very well. ![image.png](//image.easyeda.com/pullimage/AAt52VRGt3MLnOvqmtDM7gGEoFaca9uOICo2ODIl.png)
Reply
andyfierman 4 months ago
@joe.massimino, Your project is private so only you can see it. Please either make your project public so we can all try to help or add UserSupport as a member of your project so that they can study what might be the issue. To change the board outline, see: [https://docs.easyeda.com/en/PCB/Board-Outline/index.html](https://docs.easyeda.com/en/PCB/Board-Outline/index.html)
Reply
UserSupport 4 months ago
You can use hotkey K to check all the part whether if in the board outline inside.
Reply
Joseph Massimino 3 months ago
@UserSupport  I recreated gthe board from scratch, and I am now trying to make my own part, since the part I was using needed to be modified, and I found that it is not possible. I have the PCB image, and I have the schematic image. I am lacking the silkscreen image, or a way to put them all together as one part for my parts library.  If there is a tutorial on creating parts, I would like to watch it.  I really thought I would order these boards today, but things go wrong, and now I am delayed.
Reply
andyfierman 3 months ago
[https://www.youtube.com/channel/UCRoMhHNzl7tMW8pFsdJGUIA/videos](https://www.youtube.com/channel/UCRoMhHNzl7tMW8pFsdJGUIA/videos) Please read (2.3) in (2) in: [https://easyeda.com/forum/topic/How-to-ask-for-help-and-get-an-answer-71b17a40d15442349eaecbfae083e46a](https://easyeda.com/forum/topic/How-to-ask-for-help-and-get-an-answer-71b17a40d15442349eaecbfae083e46a)
Reply
Login or Register to add a comment
goToTop
你现在访问的是EasyEDA海外版,使用建立访问速度更快的国内版 https://lceda.cn(需要重新注册)
如果需要转移工程请在个人中心 - 工程 - 工程高级设置 - 下载工程,下载后在https://lceda.cn/editor 打开保存即可。
有问题联系QQ 3001956291 不再提醒
svg-battery svg-battery-wifi svg-books svg-more svg-paste svg-pencil svg-plant svg-ruler svg-share svg-user svg-logo-cn svg-double-arrow
We use cookies to offer you a better experience. Detailed information on the use of cookies on this website is provided in our Privacy Policy. By using this site, you consent to the use of our cookies.