**BUG**
Concise problem statement:
In:
https://easyeda.com/editor#id=qoiASa4mE
When I check the **V-** net in the Design Manager, it shows me that **U3 pin 1** is connected to **V-** (the GND net).
This not what the schematic shows.
What the schematic shows is correct (i.e. it shows what I drew and what I intend) and what the Design Manager says is wrong.
So there must be something getting corrupted.
Can you spot the error?
Brand new interactions and interfaces. 
Easy to use and quick to get started. 
