Try using Chrome or Firefox? Safari is not officially supported by EasyEDA.

I have cloned your project and made some changes to it using Firefox or Chromium (the FOSS version of Chrome), saved it and then done: **Update PCB...** in the Schematic Editor or: **Import Changes...** in the PCB Editor and all changes have been imported correctly. BTW: your link: [https://easyeda\.com/editor\#cmd=new\_schematic\,cmd\_for\_project=478c6af9def140d6bdb16aa15f74acae](https://easyeda.com/editor#cmd=new_schematic,cmd_for_project=478c6af9def140d6bdb16aa15f74acae)<br> <br> does not work. It only opens a blank "Anonymous" schematic sheet.

@andyfierman I originally ran into this issue using the EasyEDA desktop application. I also tried using chrome with the same results. It is strange that it is working for you because it is still not working for me. I tried both updating the PCB from the schematic editor and importing changes from the PCB editor. Both times it brings up the window declaring the changes but once I click "Apply Changes" the nets are not actually updated and remain the same. [https://easyeda\.com/editor\#id=\|ea8615ea19d64d0ab9cdd64f0dd2ecd5\|796aa0a1e96d4335a793650ffaa3842a](https://easyeda.com/editor#id=|ea8615ea19d64d0ab9cdd64f0dd2ecd5|796aa0a1e96d4335a793650ffaa3842a)<br> <br>

The link above points to the same project as: [https://oshwlab.com/julianf20/padcontroller](https://oshwlab.com/julianf20/padcontroller)<br> <br> and I have already looked at that (and confirmed that it works as expected) in Chromium and Firefox using the web based version on a linux box. Can you create (and post the link to) a public project that has the schematic changes in it but which have not yet been passed to the PCB so that it is possible to see the effect of the Update PCB... or Import Changes... actions?

@andyfierman Well I am not sure what was causing it to only happen on my end, but I ended up just changing the properties on the incorrect pins so that the net was GND. Doing this manually solved everything. Thanks anyways

Hi, I have tthe same problem with EasyEDA.  (using Firefox latest version) I made some modification in the schematic. eg. removing a connection from and to a part. Updating to PCB (Alt+U) does not remove this connection at the PCB. This should work without any doupt, otherwise EasyEDA is useless. What is wrong. Is this a bug I used Eagle, KiCat this was never a problem!!! and it should not aproblem with EasyEDA

@myecad remove connection is remove net or remove track? doesn't support to remove tracks, it cannot comfirm which track need to be removed