Before any circuit drawn in a Schematic can be converted into a PCB layout, the pins on each schematic symbol must be mapped onto the correct pads of the PCB Footprint that matches the size, shape and pinout of the physical package of the device to be soldered to the PCB. This is done by ensuring that every symbol in the schematic has a suitable PCB Footprint associated with it. I have already suggested that you read the Tutorial, to learn how to use EasyEDA successfully and in which the process of associating footprints to symbols is described in detail. [https://docs.easyeda.com/en/Schematic/Footprint-Manager/index.html](https://docs.easyeda.com/en/Schematic/Footprint-Manager/index.html)<br> <br> In the same post, I also suggested that you read the document: "How to create findable Footprints and searchable Symbols" which describes the process of creating footprints and symbols in detail. These are the documents (1), the Tutorial, and (2.3), "How to create findable Footprints and searchable Symbols", in (2), "Welcome to EasyEDA", in the topic marked as "[Must read] How to ask for help and get an answer" at: [https://easyeda.com/forum/topic/How-to-ask-for-help-and-get-an-answer-71b17a40d15442349eaecbfae083e46a](https://easyeda.com/forum/topic/How-to-ask-for-help-and-get-an-answer-71b17a40d15442349eaecbfae083e46a)<br> <br>

@Addylin, In your original post, you had links to your project which you appear to have now removed. If you instead, wish to remove your post, you can do that from your User Center. :)