Confirmed on a second machine using both FireFox and EasyEDA desktop client.

@GilgaFrank, Can you post a link to a public copy or an example project that demostrates this behaviour?

Hi Andy, this happens with every project I create. Here's an example project, can't display the names for capacitors C3 and C4. Other components work fine. [https://easyeda.com/GilgaFrank/Bughunt](https://easyeda.com/GilgaFrank/Bughunt)

@GilgaFrank Hi Just select the component and move to edit>>Name Position>>Left (or you can put it wherever you want) just follow the image below  

@JLCPCBsupport @GilgaFrank two ways 1、enable the name display  2、set part's name as display 

@UserSupport This is not the source of the issue I guess since he already has some components names displayed, I tried all ways to make (capacitor4 and 3 names visible) but it wan't work, then when I selected the "Name Position" for those components it displayed as it show the images that I posted in my previous comment. You can check that in his design through the following link : [https://easyeda.com/GilgaFrank/Bughunt](https://easyeda.com/GilgaFrank/Bughunt) Let's wait for him to check if the solution that I suggested works or not.

@JLCPCBsupport Oh, my mistake, that is editor's bug, the name offset to a long position, it should be fixed at v6.3.53, @GilgaFrank Does this PCB created at v6.3.53 or previous version?

Editor version is 6.3.53 @UserSupport, as I mentioned in the first post I have taken all the steps you suggested but the component names were not visible. The suggestion bu @JLCPCBSupport to set the name position solved the problem but the issue persists when I create a new project.

Just found an additional but similar problem. [https://easyeda.com/GilgaFrank/Bughunt2](https://easyeda.com/GilgaFrank/Bughunt2) In this project I can't see any capacitor names on the PCB (as before) but additionally I can't see capacitor names for C3 and C4 on the schematic. Again, this is editor version 6.3.53. Please advise.

@GilgaFrank At least we solved part of the issue, I will investigate more and let you know once I find some useful solution.

@JLCPCBSupport, thanks for your assistance! Unfortunately with the current situation of not being able to see component values on the schematic the software is almost entirely useless at the moment.

@UserSupport, @JLCPCBsupport, @GilgaFrank, Some more information. When I copy either of the original projects, I see the same problems. * I do not think it is anything to do with the names being misplaced a long way away from the footprint. If that were true then if the name visibility were set to Yes and then the K key pressed, the PCB would zoom out to the include the misplaced names. That does not happen. * However, if I create a new PCB from them and then lay them out like in the originals, I do not see the issue: visibility of the names and prefixes can be toggled as expected. I am using the online version and have tried this in both Chrome and Firefox.

Additionally, the same display fault occurs when I try to show the package names on the schematic.