Hi All I am reasonably new to spice simulation and seem to be getting incorrect gain simulation for my inverting amplifier circuit. I started out using a TL072 and then tried a completely different and simplified circuit with a TL071 with similar results. I then tried the standard UA741CP from the EELib library with exactly the same results. I am expecting a 30DB gain with a 10K input resistor and a 300K feedback resistor and a dual rail +-15V supply. All the designs and other simulations on other software indicate I should be getting a 30DB gain with +-3V on the output. Below is my sample circuit, if anyone can shed some light on why this isn't working in Easyeda or let me know where I am going wrong it would be great. Thanks https://easyeda.com/editor#id=1bbd828e7e564518951d7ffe8a7432d2