Hi Brandon,

Your project is private so only you can see it.

Without sight of your project it is not possible to offer any direct diagnosis.

Suggest you:

1. check the PCB Design Manager in the left hand panel to investigate what the ratlines are converging on in the top left of the PCB;
2. zoom in to where the ratlines are converging on in the top left of the PCB;
3. check the Schematic using the Design Manager in the left hand panel to investigate what nets the ratlines represent.

Hi Andy,

It's not limited to only one of my projects, it happens in all of them. They aren't really ratlines, because all of my components have been placed and connected. They only look the same as ratlines. I suspect it's some sort of visual rendering error or glitch. I've made one of my projects public if that helps, but as I said it isn't limited to a specific project.

https://easyeda.com/BdT141/TinyProg-Board

@BdT141,

Sorry but the link is incomplete.

This works:

https://easyeda.com/BdT141/TinyProg-Board

and there's no problem with that one:

It looks OK for me in both Firefox (66.0.1) and Chrome (Chrome 73.0.3683.86)

Ok, thanks anyway. I just don't get it because it happens on both of my computers, both running Firefox 66.0.1. I'll just live with it until something updates somewhere and hope it's fixed.

Try clearing the Firefox cache and reloading EasyEDA?

You're not updating the version but if you go through the steps below it might fix the issue:

https://docs.easyeda.com/en/FAQ/Editor/index.html#How-to-update-editor-to-latest-version

same issue, different pc, different SO, sincerly don't know..

@MB-Industry,

Do you have a project you can share to demonstrate the issue?

Is the origin set somewhere miles off to the top left ?

Or have you tried deleting the board outline and creating a new one ?

Hi
That is Firefox 66's bug, please downgrade to v65 or change to Chrome, thank you