Your project is private so only you can see it. It sounds like you mistook the thin blue ratlines for the traces. Please see: [https://easyeda\.com/andyfierman/Elements\_of\_a\_simple\_PCB\-e42c7b2a4e17449f821a97d04806aeeb](https://easyeda.com/andyfierman/Elements_of_a_simple_PCB-e42c7b2a4e17449f821a97d04806aeeb) and read: [https://easyeda\.com/andyfierman/Welcome\_to\_EasyEDA\-31e1288f882e49e582699b8eb7fe9b1f](https://easyeda.com/andyfierman/Welcome_to_EasyEDA-31e1288f882e49e582699b8eb7fe9b1f)

BTW; the issue is not that you didn't run the Autorouter. The issue is that you did not route any tracks. You do not have to rely on the Autorouter: you could have down them manually.

Thank you.  I figured there was a way to do them manually as well after I found Auto Router, but same idea. I mistook the ratlines for traces.  Amateur hour for me. Thanks!