Hi, I have got problem, while using easyEDA. For example on this project, which I made yesterday: I designed schematic and then converted to PCB. I layed down all components on the PCB as I wanted, saved all, so if anything goes wrong, I have it saved and than I went on routing. Now, when I open the project page, the PCB privew is not correctly showed, it is from the old save, so copper is not routed, but if I click on open i editor, it shows everything OK. So preview is not refreshed correctly. This happens me all the time and it is such a pity! Sometimes with PCB, sometimes with scehmatics. As an example my latest project has also bad preview: https://easyeda.com/marouncz/odpuzovac_komaru-056629f0998e45c08a8d34b366180a0a Thanks a lot for any help! :-) marouncz