Hi, After you convert to PCB, you will get a empty board with componets which connect with ratline. ![enter image description here][1] Then you need to drag these components into the board outlines. ![enter image description here][2] Now you can press the connect the pads with Tracks, just like you create the schematic. Or you can press the auto router button to use EasyEDA's autorouter service. It is fast and easy. ![enter image description here][3] Please check the help file via https://easyeda.com/Doc/Tutorial/PCB.htm [1]: /editor/20151020/5625d3bde29b1.png [2]: /editor/20151020/5625d414ada6e.png [3]: /editor/20151020/5625d49744a13.png