Pads on All Layers with same netname do not show as error in Design Manager
590 1
andyfierman 3 years ago
**BUG** Concise problem statement: If you label the NET property for a pad on `All layers` with no hole as (for example) `BOO` then a net connected to the pad on the top layer will be netlabelled as `BOO` and a net connected to the pad on the bottom layer **will also** be netlabelled as `BOO`. This does **not** mean that they are connected by copper but this will not show up in the Design Manager as an error! Steps to reproduce bug: 1. Create a pad on all layers but set the hole size to zero; 2. Connect a trace to the pad on the top layer; 3. Connect a trace to the pad on the bottom layer; Results: Both trace on top layer and trace on bottom layer are netlabelled as `BOO` even though the nets are not connected by a through plated hole. This user error is not detected by the Design Manager. Expected results: A warning that pad is on all layers but has no hole? A warning that nets have same name on different layers but are not connected by copper? Browser: Chrome.
dillon 3 years ago
At present, we just think the the Pads is all, then will connect all, not take care of the holes. It seems not easy to fix this case.
Login or Register to add a comment
如果需要转移工程请在个人中心 - 工程 - 工程高级设置 - 下载工程,下载后在 打开保存即可。
有问题联系QQ 3001956291 不再提醒
svg-battery svg-battery-wifi svg-books svg-more svg-paste svg-pencil svg-plant svg-ruler svg-share svg-user svg-logo-cn svg-double-arrow
We use cookies to offer you a better experience. Detailed information on the use of cookies on this website is provided in our Privacy Policy. By using this site, you consent to the use of our cookies.