Suggest you check the Capabilities page on the JLCPCB website. Maybe change the Category of this topic to JLCPCB too.

@andyfierman JLCPCB has the capability to do that. I want to know how to make the panel in EasyEDA. Currently if I panelize, it is keeping a V-cut in space. Instead of V-Cut I want it to be blank space.

@zero1, I know JLCPCB can  do panelization. Their Capabilities page has notes about how to do it. You can manually panellise a board in EasyEDA. [https://docs.easyeda.com/en/PCB/Panelize/index.html](https://docs.easyeda.com/en/PCB/Panelize/index.html)<br> <br>

@andyfierman This is what I want to do:  I want empty space in between the rows? There are 2 usb connectors on my board and as a result during assembly, an empty space is required. This is what the panelize function is doing:  There is a 2 mm strip with vcut on both sides. I want to know how to get a 2 mm empty space instead of a strip with V-cut on both sides?

Panelise it manually as shown in the Tutorial. Draw the V-Cut lines where you want them in the Board Ouyline Layer.