**BUG**
Concise problem statement:
Adding extra parameters to symbols in the schematic which then appear in the BoM works OK but it does not when you do the same thing to the PCB.
Steps to reproduce bug:
The problem is demonstrated in:
https://easyeda.com/andyfierman/BoM_directly_from_PCB-c57c9a4ba5284343b6e8029b68993115
Results:
Some added parameters appear in the BoM, others do not.
Expected results:
Adding extra parameters to packages in the PCB should then appear in the BoM in the same way it does when you add extra parameters to symbols in a schematic.
Browser: