Home>Forum>Topic
Latest Topics Latest Replies EasyEDA Std EasyEDA Pro JLCPCB LCSC OSHWLAB General Discuss
Schematic PCB Simulation Skill Extension Feature Requests Bug Reports
You need to use EasyEDA editor to create some projects before publishing
Physical Board limit
702 7
cc_CGB 6 years ago
Having created a couple of boards, I have attempted to make a larger pcb. 200 x 380 mm. I am using Google Chrome (the same as always), using the latest EDA V5.8.19. I have multiple "Via to Plane" errors. A bit confused as to how this has occurred. I only have a top and bottom layer, routing went faily quickly and from checking has done so correctly. Any ideas? Perhaps a new day tomorrow and the lightbulb will come on. Cheers Colin![1.jpg](//image.easyeda.com/pullimage/SUlKWlxDpvv6MqiVkjYCmz1AFlyl43SQJplglAyk.jpeg)
Comments
andyfierman 6 years ago
Rebuild the copper planes?
Reply
UserSupport 6 years ago
EasyEDA have no limitation for the PCB size. that is because of you have enabled the inner layer, and change the layer type to plane, when you move the via on the plane but without rebuild the plane with SHIFT+B , it will alert this error on the DRC error. or you can switch to inner layer to rebuild it: ![image.png](//image.easyeda.com/pullimage/Tfa8RcyMQBHt9o6fW33u6sHtxv9rFjuuZKfX976J.png)
Reply
cc_CGB 6 years ago
Thanks folks. I had no internal layers, it was only a 2 layer (top and bottom) board, which is why I couldn't work out what had gone wrong. So I added two layers (Inner 1 and 2) and there was an internal plane. Clearly I must have done this. But when the system shows only 2 layers the error message left me wondering. All sorted now, thanks again
Reply
UserSupport 6 years ago
Please right-click the project folder and download to [support@easyeda.com](mailto:support@easyeda.com) I will help to check.
Reply
cc_CGB 6 years ago
@UserSupport: All sorted now, thank you. I must have added a ground plane in an earlier version and then unchecked this layer which I forgot about. To cure my problem, I re-added the internal layers which showed that a Ground Plane existed, I  deleted this and everything is now ok.
Reply
UserSupport 6 years ago
Maybe you met this problem? [https://easyeda.com/forum/topic/Switching-from-4-layers-to-2-layers-problem-7a6370fd4ff24e368ec02df4ea8477d7](https://easyeda.com/forum/topic/Switching-from-4-layers-to-2-layers-problem-7a6370fd4ff24e368ec02df4ea8477d7)
Reply
cc_CGB 6 years ago
@UserSupport Yes, this is exactly what I had. All cured now though
Reply
Login or Register to add a comment
goToTop
你现在访问的是EasyEDA海外版，建议访问速度更快的国内版 https://lceda.cn(需要重新注册)
如果需要转移工程请在个人中心 - 工程 - 工程高级设置 - 下载工程，下载后在https://lceda.cn/editor 打开保存即可。
有问题联系QQ 3001956291 不再提醒
svg-battery svg-battery-wifi svg-books svg-more svg-paste svg-pencil svg-plant svg-ruler svg-share svg-user svg-logo-cn svg-double-arrow -mockplus- -mockplus- -mockplus- -mockplus- -mockplus- -mockplus- -mockplus- -mockplus-@1x -mockplus-

Cookie Notice

Our website uses essential cookies to help us ensure that it is working as expected, and uses optional analytics cookies to offer you a better browsing experience. To find out more, read our Cookie Notice