Which is wrong: the Schematic Symbol (SCH Lib) or the PCB Footprint (PCB Lib)?

Er, Please check you schematic, PCB and component choices. MBR0520LT1G is a diode!  [https://datasheet\.lcsc\.com/szlcsc/1809251722\_ON\-Semicon\-MBR0520LT1G\_C23848\.pdf](https://datasheet.lcsc.com/szlcsc/1809251722_ON-Semicon-MBR0520LT1G_C23848.pdf)

You are right sorry. The mos No. is DMG1013T-7. The two are side by side so grabed the wrong one. I have gone into search again for the same # and this time got same DMG1013T-7 but pinout is correct in the sch and therefore now correct in PCB as well. Which is wrong, and which is being affected by the other I would say it is the sch lib device which is labled wrong. From there after is is wrong. The PCB netlines are going to the correct numbers but not the correct pin locations.

If you find something wrong in a SCH Lib or PCB Lib, please right-click on it and do **Report Error**. If you wish to post in the Forum about things like this, please post at least a screenshot of the Search Libraries tool to give some idea of which of the many versions in the library that you are asking about. Also, please pay particular attention to the warnings about checking all parts, especially user contributed before using. Please also see: (2.3) in (2) in: [https://easyeda.com/forum/topic/How-to-ask-for-help-and-get-an-answer-71b17a40d15442349eaecbfae083e46a](https://easyeda.com/forum/topic/How-to-ask-for-help-and-get-an-answer-71b17a40d15442349eaecbfae083e46a) Thanks.

Right click and report, got cha. Thank you.