You need to use EasyEDA editor to create some projects before publishing
Pins on components that should be gnd are marked 5v
412 2
markonjak 3 years ago
I'm having a problem, components that are in the schematic marked to have gnd pins are in the pcb actually 5v, there are'nt any ground pins, like you see in the picture on the regulator and capacitors there is just 5v instead of gnd, any idea how to fix this or what's wrong?, tried making a new schematic and copying and instead of no gnd, there was no 5v, pins marked for 5v were gnd instead![2021-01-30_19-41.png](//image.easyeda.com/pullimage/Aqh4OWuHtZnVy4ZaXiNueKzxYlpShD60fRMWe16q.png)
Comments
andyfierman 3 years ago
Somewhere you have shorted the GND and +5V nets together in the schematic. Check the Schematic Design Manager and look closely at pins 1, 2 and 3 on P1 here: ![image.png](//image.easyeda.com/pullimage/zZqDZNZ4iOeQ4kGrV0HaCprzv0i0RFVgMAGNauoU.png) You have 3 join dots that should not be there and one could be a short from +5V on pin 6 to GND on pin 2. The other two may be shorted connections too.
Reply
markonjak 3 years ago
It seems there was a problem with this header footprint which i found in user contributed, i chose another one and now everything is like it's supposed to be Thanks
Reply
Login or Register to add a comment
goToTop
你现在访问的是EasyEDA海外版,建议访问速度更快的国内版 https://lceda.cn(需要重新注册)
如果需要转移工程请在个人中心 - 工程 - 工程高级设置 - 下载工程,下载后在https://lceda.cn/editor 打开保存即可。
有问题联系QQ 3001956291 不再提醒
svg-battery svg-battery-wifi svg-books svg-more svg-paste svg-pencil svg-plant svg-ruler svg-share svg-user svg-logo-cn svg-double-arrow -mockplus- -mockplus- -mockplus- -mockplus- -mockplus- -mockplus- -mockplus- -mockplus-@1x -mockplus-

Cookie Notice

Our website uses essential cookies to help us ensure that it is working as expected, and uses optional analytics cookies to offer you a better browsing experience. To find out more, read our Cookie Notice