English (Google) translation: Hello, in pcb Some tracks, on some components, do not remain stuck with the pellets, when one moves these components, the tracks were placed manually. Is there a function that forces these pellets to stay stuck with the tracks? Your project is private so only you can see it. Please post the link to a public project to show us these tracks so that we can try to help you. Votre projet est privé, donc vous seul pouvez le voir. Merci de poster le lien vers un projet public pour nous montrer ces pistes afin que nous puissions essayer de vous aider.

Merci, ok j'ai enrégistré en public, voici le lien: [https://easyeda\.com/editor\#id=\|81184a058d1c499192b4653f24aecf91](https://easyeda.com/editor#id=|81184a058d1c499192b4653f24aecf91)

[porte poulalier v1](https://easyeda.com/editor#id=|81184a058d1c499192b4653f24aecf91)

You have have not followed the recommended Design Flow as shown in the Tutorial so you have created this PCB directly in the PCB Editor without starting from a Schematic.. We strongly recommend that you do not do this but if you want to continue, please translate and read: [https://easyeda\.com/forum/topic/How\_does\_the\_Connect\_Pad\_to\_Pad\_tool\_work\_\-JgQO0Ay7H](https://easyeda.com/forum/topic/How_does_the_Connect_Pad_to_Pad_tool_work_-JgQO0Ay7H) and: [https://easyeda\.com/forum/topic/The\_best\_way\_to\_design\_a\_PCB\_in\_EasyEDA\-ThR3pwqIC](https://easyeda.com/forum/topic/The_best_way_to_design_a_PCB_in_EasyEDA-ThR3pwqIC) Comme vous n'avez pas suivi le flot de conception recommandé indiqué dans le didacticiel, vous avez créé ce PCB directement dans l'éditeur de PCB sans avoir à partir d'un schéma. Nous vous recommandons vivement de ne pas le faire, mais si vous souhaitez continuer, veuillez le traduire et lire: [https://easyeda\.com/forum/topic/How\_does\_the\_Connect\_Pad\_to\_Pad\_tool\_work\_\-JgQO0Ay7H](https://easyeda.com/forum/topic/How_does_the_Connect_Pad_to_Pad_tool_work_-JgQO0Ay7H) et: [https://easyeda\.com/forum/topic/The\_best\_way\_to\_design\_a\_PCB\_in\_EasyEDA\-ThR3pwqIC](https://easyeda.com/forum/topic/The_best_way_to_design_a_PCB_in_EasyEDA-ThR3pwqIC)

Ok, merci, j'ai compris ,je vais lire et suivre la procédure en faisant aussi le schema.

Aussi: [https://easyeda\.com/andyfierman/Welcome\_to\_EasyEDA\-31e1288f882e49e582699b8eb7fe9b1f](https://easyeda.com/andyfierman/Welcome_to_EasyEDA-31e1288f882e49e582699b8eb7fe9b1f) :)