Please see: [https://easyeda\.com/andyfierman/Welcome\_to\_EasyEDA\-31e1288f882e49e582699b8eb7fe9b1f](https://easyeda.com/andyfierman/Welcome_to_EasyEDA-31e1288f882e49e582699b8eb7fe9b1f) and then: [https://docs.easyeda.com/en/Introduction/Shortcut-Keys/index.html](https://docs.easyeda.com/en/Introduction/Shortcut-Keys/index.html)

@andyfierman You really think that this is an answer to the question? Come on guy...

Just say Easy Eda is not able to do it!

@lambertax "Just say Easy Eda is not able to do it!" I don't understand why I would say that because EasyEDA has supported double sided component placement since before it was officially launched in 2013. My link: [https://docs.easyeda.com/en/Introduction/Shortcut-Keys/index.html](https://docs.easyeda.com/en/Introduction/Shortcut-Keys/index.html) points to the section of the Tutorial that describes two Hotkeys, T and B:  In the almost 2 years since the original post, IIRC, the FAQ has been expanded to include this link: [https://docs.easyeda.com/en/FAQ/Editor/index.html#How-to-put-a-component-on-the-bottom-layer](https://docs.easyeda.com/en/FAQ/Editor/index.html#How-to-put-a-component-on-the-bottom-layer) The other link: [https://easyeda\.com/andyfierman/Welcome\_to\_EasyEDA\-31e1288f882e49e582699b8eb7fe9b1f](https://easyeda.com/andyfierman/Welcome_to_EasyEDA-31e1288f882e49e582699b8eb7fe9b1f) which includes a link to the main Tutorial, opens by saying: "These are some notes to help you create successful PCB projects and also have fun on the way. Please note that it is strongly advised that you don’t start off by trying to create an actual project. Start by reading this and the linked documents. Then create a dummy project, the sole purpose of which is to play with the tools and learn how to use them. Learning through play is a powerful technique and is not just for kids! 1) To save a lot of pain and confusion later, please take the time to read the: [EasyEDA Tutorial](https://docs.easyeda.com/en/Introduction/Introduction-to-EasyEDA/index.html) * This will help you to learn to drive EasyEDA." EasyEDA is a lot easier to learn than many similar tools but that does not mean that it can be used to its fullest extent without some background reading first.