**Feature Request**
All symbols in EasyEDA Libs should have default simulation models associated with them:
>Diode: EB91_DM
>Triode: ECC83_DM
>Tetrode: EF86_DM
>Pentode: I think we should remove the 5 pin pentode symbol from EasyEDA Libs and just put it under `More Libraries...`. See below.
**Why we should remove the 5 pin pentode symbol from EasyEDA Libs and just put it under `More Libraries...`:**
The tetrode symbol is used for **all** available pentode models because **all** the so-called pentode models in fact only have 4 pins (Anode, Grid1, Grid2 and Cathode).
This is because the pentode models all assume that Grid3 is connected to the Cathode and so the tube actually operates as a tetrode.
No pentode models have yet been found suitable for use with the 5 pin pentode symbol.