You need to use EasyEDA editor to create some projects before publishing
Properties cannot be edited reliably
1041 21
koosjr 6 years ago
This is starting to waste a LOT of my time. When designing PCB's it is extremely difficult to get a property of an item to change and many times it needs to be done multiple times until it eventually works. Sometimes it does not want to work at all.
Comments
Tutorials 6 years ago
Hi What browser are you using? what item didn't work properly? please clarify, we need to dig it out and improve.
Reply
acrix 6 years ago
in new version any property  in any browser something broken with edit and select
Reply
acrix 6 years ago
look like only in chrome problems, firefox work
Reply
Tutorials 6 years ago
@acrix Can you tell me the detail? And please make sure the editor version is v5.3.14.
Reply
koosjr 6 years ago
It does look like the problem is only with Chrome. I tries Firefox and I could edit the properties without problems so far.
Reply
acrix 6 years ago
yes, and look like problem with new version of chrome (Version 65.0.3325.181 (Official Build) (64-bit)) this problem in schematic capture but also this problem exist in pcb edit program in old chrome problem actually hard to explain when you select something and try edit properties in right panel, it just not changed and sometimes it work and sometimes not
Reply
koosjr 6 years ago
@acrix , exactly the way I experience it too, although I cannot really realty it to a specific version of Chrome.
Reply
acrix 6 years ago
i record video, to try to explain [https://integracom.ru/evideo/easyeda.mp4](https://integracom.ru/evideo/easyeda.mp4) this link work one day
Reply
acrix 6 years ago
@[Tutorials](https://easyeda.com/Tutorials) can u dev crew reproduce problem?
Reply
acrix 6 years ago
@Tutorials ping
Reply
Tutorials 6 years ago
@acrix I can repeat this issue at Linux Chrome. others works good. we fixed this and will release at next release.thanks
Reply
acrix 6 years ago
every body loves linux and chrome, please dont fear to test it and support, thank you
Reply
mtiutiu 6 years ago
I'm experiencing the same issues using Chrome and Linux - I hope it gets fixed soon as it is really annoying. Thanks for your great work so far. I love the simplicity and the way EasyEDA works - keep up the good work.
Reply
koosjr 6 years ago
@Tutorials , The second week have passed since you indicated that the updated version will be launched. I do not see the update yet. Any comments?
Reply
minn0w 6 years ago
@Tutorials , I was about to report this as well. In the previous version i could simply edit a PCB component property by just entering it and clicking somewhere else. But quite frustratingly for some reason with my chrome in win10, i need to type in the value (cant copy / paste) and press enter (sometimes twice) while still having the mouse over the in put edited. If i fail to do any of this, the property will just switch back to it;s old value. I have just updated to 5.3.14 before i reported this.
Reply
koosjr 6 years ago
Great, so this is on Windows too.
Reply
dillon 6 years ago
@minn0w  we will fix this soon
Reply
mchahn 6 years ago
For me it is almost unusable right now.  If it worked like this when I was first looking for an editor, I would have moved on and ignored this because of the bugs.  I fear easyeda is going to lose customers.  Can you please make an old version available?  It worked great for years. I hope it doesn't sound like I'm a troll.  I say this because I care.
Reply
dillon 6 years ago
@koosjr @mchahn  It is testing.  will release in 24hours, if you can take a test, try [https://alpha.easyeda.com/editor](https://alpha.easyeda.com/editor)
Reply
mchahn 6 years ago
Everything seems to work now in alpha.  I'll be using it today and I'll let you know if I find any bugs. Thanks, and I'm sorry if my message seemed mean.
Reply
koosjr 6 years ago
OK, I have quickly tested the most irritating bits, and it seems to be working MUCH better now. Ecstatic about the 3-decimal precision. There is one BIG nice to have I would like though: If one draws a track on the same layer that there is a copper layer, one cannot see the track as the track and the copper layer is the same colour. Could you perhaps just make the track for example to change to a white colour while drawing it so that one at least can place it without changing the copper layer to a None-fill region and then back afterwards to solid.
Reply
Login or Register to add a comment
goToTop
你现在访问的是EasyEDA海外版,建议访问速度更快的国内版 https://lceda.cn(需要重新注册)
如果需要转移工程请在个人中心 - 工程 - 工程高级设置 - 下载工程,下载后在https://lceda.cn/editor 打开保存即可。
有问题联系QQ 3001956291 不再提醒
svg-battery svg-battery-wifi svg-books svg-more svg-paste svg-pencil svg-plant svg-ruler svg-share svg-user svg-logo-cn svg-double-arrow -mockplus- -mockplus- -mockplus- -mockplus- -mockplus- -mockplus- -mockplus- -mockplus-@1x -mockplus-

Cookie Notice

Our website uses essential cookies to help us ensure that it is working as expected, and uses optional analytics cookies to offer you a better browsing experience. To find out more, read our Cookie Notice