Oh sory - problem with Flip Horizontal and Flip Vertical for names of delatils - not with rotating.

The PCB view in EasyEDA is always from the top layer looking through the board to the bottom layer. Therefore anything on the bottom layer appears to be mirrored.

It does not make sense to flip things on the layers of a PCB.

Imagine what would happen if you flipped a SOT-23 package for a bipolar transistor: you would still swap the base and emitter pins!

Therefore it only makes sense to rotate parts, images or logos and text on the PCB.

@andyfierman i want to flip only name of details not details. I'am understanding what you mean. In my situation i want prepare the board with details in both sides and when i send details to bottom side of PCB all names of details are mirrored in silklayer. I solved this problem, changed "Name Display" parameters for all detail to INVISIBLE and i added for all them TEXT label.

In EASYEDA we have a two types of select - when we select the component and when we select the name label. We can move the name of the component, regardless of the component itself. When we have such an opportunity, why we can't flip(FLIP not rotate) name of component.

"I'am understanding what you mean. "

I'm not sure you are.

The silkscreen on the bottom layer will read the right way round when you turn the board upside down to view the bottom layer.

"...when i send details to bottom side of PCB all names of details are mirrored in silklayer. I solved this problem, changed "Name Display" parameters for all detail to INVISIBLE and i added for all them TEXT label."

• So now, when you get your board back from manufacture, turn it upside down and look at the bottom side of the board, all those TEXT labels will be back to front.

Try getting a sheet of clear plastic (for example from some plastic packaging) and a marker pen.

Write TOP LAYER on one side.

Turn it over and - so the text does not overlap - write BOTTOM LAYER on the other side.

• Now turn it over again so the top layer is facing up and then observe that the BOTTOM LAYER text is mirrored just like in the EasyEDA PCB Editor.