Forum - EasyEDA - An Easier Electronic Circuit Design Experience

Latest Topics Latest Replies EasyEDA Std EasyEDA Pro JLCPCB LCSC OSHWLAB General Discuss

Schematic PCB Simulation Skill Extension Feature Requests Bug Reports

Rather BAD EasyEDA + JLCPCB + SMT assembly experience

1862 8

dreAn 4 years ago

Please see files here: [https://drive.google.com/drive/folders/1k18Cu3OPY8_nzICmUbo6Om4ODnvjpDmi?usp=sharing](https://drive.google.com/drive/folders/1k18Cu3OPY8_nzICmUbo6Om4ODnvjpDmi?usp=sharing) 1: BOM list in EasyEDA looks good, most parts selected from LCSC ![1-most components look good in BOM list.png](//image.easyeda.com/pullimage/2JdNIaAGfgVjEoxAITM91PL8IvjUod3SrJi23bkr.png) 2: exported BOM refers to 0603 packs as 0603' (correcting that does not fix step 3) 3: the uploaded BOM fail to find the parts... ![3-Assembly fail to find the components.png](//image.easyeda.com/pullimage/95SgBWiGAaqtiFJ3aYQKLcgAuV1pK0y1gejfxU3H.png) So I needed to choose all missing parts over again - the components I got to choose among, had wrong packages, and did not show the value in any place but the part number (for those who can decode it) Once that is completed, and everything thing is put into the "shopping cart" - one proceeds to payment. Should one, at any point, try to go back before paying, (to check/verify how many PCB's or SMT assemblies were selected, then BANG - the cart is empty, and you need to start over again !) Check my logs, I did it at least three times. So I am not sure I got the right parts, and this way every test batch could be inconsistent with the previous batch. (as different parts may be selected)

Chrome 79.0.3945.79 Linux EasyEDA 6.3.22

Comments

ntldr 4 years ago

The primary issue seems to be that you're selecting LCSC parts instead of JLCPCB Assembly parts. Not all parts from the LCSC stock are available for assembly, so you'd need to choose from the available parts for assembly. [Those can be found here](https://jlcpcb.com/client/index.html#/parts). For example position 12 (10k 0603 1%) in your schematic/bom is a Tyohm RMC060310k1%N, which is not available for assembly. Instead you could select the "Uniroyal Elec 0603WAF1002T5E" (also 0603 10k 1%). If you do that from within EasyEDA the BOM will also reflect the correct part.

Firefox 71.0 Windows 10 EasyEDA 6.3.22

UserSupport 4 years ago

1, you need to use JLCPCB assembly part. ![image.png](//image.easyeda.com/pullimage/ncgIUGBgPVJ1uRTatQQMbw2tqS7B71xpiDT8duWl.png) 2, export as 0603' is correct, that is for avoid when open the BOM at the xlsx application, the 0603 will show as 603 issue, it doesn't impact the PCB manufacturer and Parts store process

Chrome 79.0.3945.88 Windows 10 EasyEDA 6.3.22

dreAn 4 years ago

ok, so it is mainly my fault. thank you. This information could be somehow clearer. Please note: Even if I need to reselect a component, the offered choices should be the same package. So, JLCPCB can assemble 2 or 5 PCB's, what happens when I wish for a small production? - is there a way of ordering 10 or 50 too? (just to keep same vendor/parts, and get exactly what was tested)

Chrome 79.0.3945.79 Linux EasyEDA 6.3.22

zhongwangwang007 4 years ago

@dreAn you could do it by multi-board layout.

Chrome 79.0.3945.88 Windows 10 EasyEDA 6.3.22

dreAn 4 years ago

@zhongwangwang007 Is the multi-board layout option possible to combine with V-groves or other means for easy separation so I could easily break them apart?

Chrome 79.0.3945.79 Linux EasyEDA 6.3.22

zhongwangwang007 4 years ago

@dreAn personlly, i don't think so. you need manual do the multi-board. because when exract bom and pick and place file, all the compoents should be included.

Chrome 79.0.3945.117 Windows 10 EasyEDA 6.3.22

dreAn 4 years ago

I am having a hard time finding the "JLCPCB assembly" parts I need, there is no intuitive way to search for a "package size+ value + basic" - if you wish to find 10k 0603, it cannot be found in a simple way ?

Chrome 79.0.3945.117 Linux EasyEDA 6.3.22

JLCPCBsupport 4 years ago

@dreAn hello, sir, the components size and value information are available here:[https://jlcpcb.com/client/index.html#/parts](https://jlcpcb.com/client/index.html#/parts), and JLCPCB now is advancing the SMT service by adding more parts to the storage and our engineer are also optimizing our website. All the feedback and comments are valuable for us, and more touch with JLCPCB here：[https://support.jlcpcb.com/article/45-contact-jlcpcb?_ga=2.21209851.1985586474.1579489290-1955742861.1559010775](https://support.jlcpcb.com/article/45-contact-jlcpcb?_ga=2.21209851.1985586474.1579489290-1955742861.1559010775)

Chrome 79.0.3945.130 Windows 7 EasyEDA 6.3.22

你现在访问的是EasyEDA海外版，建议访问速度更快的国内版 https://lceda.cn(需要重新注册)
如果需要转移工程请在个人中心 - 工程 - 工程高级设置 - 下载工程，下载后在https://lceda.cn/editor 打开保存即可。
有问题联系QQ 3001956291 不再提醒

Cookie Notice

Our website uses essential cookies to help us ensure that it is working as expected, and uses optional analytics cookies to offer you a better browsing experience. To find out more, read our Cookie Notice

Unleash creativity, start design now.

Cookie Notice