Hello experts! I'm new to EasyEDA and to PCB designing in general. I'm an electronics engineer though. I've been trying to make a PCB for a prototype I've been working for. I am using an ADE7763 Energy Meter SMD IC. I'm using an SSOP to DIP adapter to build the prototype board. Since the adapter board is not a standard component, 1\. I created a PCB Lib first and created 20 pads and spaced them as per the dimensions of the SSOP\-DIP adapter board pins\. \(image 1\) 2\. I then create a Schematic Lib with a box and 20 pins\. I ensure all pads and pins are mapped correctly \(image 2\) 3\. I then create a schematic and add the schematic lib of the adapter with few components to test \(image 3\) 4\. I create a PCB from the schematic When the PCB window opens up, I don't see any ratlines connected from the SSOP adapter to the other components (image 4). Am I doing something wrong here? Is there a way to export my schematic, schematic lib, pcb lib so that I can attach it here? Thanks a ton in advance for your help!