I want to create a SCR shut down circuit, but it is not running "error: does not have a probe"
I googled it but I couldn't find the answer or atleast I didn't understand it since English is not my native language....
can someone help me out with this circuit:
https://easyeda.com/editor#id=d313a443978d464e89c5b76833dee979
I want to see what the current through the resistor in the end is, therefore I want to trigger the first SCR lets say after 5 ms and then to shut it down trigger the second SCR which is above it after 10 ms, then I want to see if the second SCR will be shut down because the negative source of the capacitor shuts it down and what voltage I will have, because my task is to create a circuit at which the capacitor voltage will not become negative
@agim.berisha,
Welcome to EasyEDA.
Please see:
https://easyeda.com/Doc/Tutorial/Share.htm#Sharing
To understand how to use EasyEDA for simulation please read:
https://easyeda.com/andyfierman/Welcome_to_EasyEDA-31e1288f882e49e582699b8eb7fe9b1f
and in particular read Section (3).
I have tried to write the eBook in plain English so you should be able to use Google and/or Bing Translate if you have trouble reading it in English.
:)
See also:
https://easyeda.com/andyfierman/Thyristor_dv_dt_demo-DFztL3Xfx
https://easyeda.com/editor#id=57484b1c27dd43aaa8aada2cb5f5fc81
https://easyeda.com/editor#id=63f9efaae37446178f7e1b00033dcb7b
https://easyeda.com/editor#id=e489d5386099453088cf12a162d270d3