I would like to change line clearance between the ground plane and specific RF lines. I see how to set line clearance or gap width on a global basis but not on a case by case basis.
Would like a recommendation on the best approach. See attached picture of an example, I would like to increase the gap between the RF line and the ground plane.
Thanks
Fred
![RF LINE.jpg](//image.easyeda.com/pullimage/H60LcClM6AXw2ZOCQEhSdrIADjqMn51JFHoOjYK1.jpeg)
Firefox
77.0
Windows
10
EasyEDA
6.3.43