As an alternative, you can enter a simulation command directly into the schematic. See: https://docs.google.com/document/u/1/d/1OWZVVFRAe_2NW3WratpkA_SGuHa5AcRow5ZRfvcoVTU/pub#h.2u6wntf

Hi GuiOhm, Sorry but I cannot reproduce your problem. * What browser are you using? Here's an AC analysis from 1Hz to 100kHz with 1 step/decade: ![enter image description here][1] and here's what the plot looks like: ![enter image description here][2] Here's an AC analysis from 1Hz to 100kHz with 10 steps/decade: ![enter image description here][3] and here's what the plot looks like: ![enter image description here][4] then with 100 steps/decade: ![enter image description here][5] and here's what the plot looks like: ![enter image description here][6] * If you want to check that your edit has been passed to the simulation, do: `Super Menu > Miscellaneous > Simulation Results... > Download Netlist` and then look just below the `.control` line for the `ac ....` command. [1]: /editor/20170407/58e7743621bc3.png [2]: /editor/20170407/58e774bcf15bd.png [3]: /editor/20170407/58e775fa42066.png [4]: /editor/20170407/58e7755da9a39.png [5]: /editor/20170407/58e7760eab575.png [6]: /editor/20170407/58e7759782afe.png